How Does it Work?

The GeoSpring water heater combines energy-saving heat-pump technology with traditional electric elements using a fraction of the energy. The integrated compressor and evaporator use a fan to draw in ambient heat from surrounding air to heat refrigerant. Then the heated refrigerant runs through coils that wrap the tank all the way to the bottom, transferring heat into the water tank. This innovative process creates the same amount of hot water as a traditional electric water heater, while reducing your heating expenses up to 62%—a savings of $365* per year.

GeoSpring Control Panel

Easy-to-use Control Panel.

The GeoSpring electric heat pump water heater is one of the first residential electric water heaters with an electronic back-lit LCD display. With 4 modes and a vacation setting to choose from, you can start maximizing your energy savings immediately.


Launch Demo

* Based on DOE test procedures and comparison of 50-gallon standard electric tank water heaters using 4879 kWh per year vs. the GeoSpring hybrid water heater using 1830 kWh per year and national average electricity rate of 12 cents per kWh.

Multiple Settings for a Variety of Needs.


Heat Pump Mode

Heat Pump

This is the most efficient mode providing you with the greatest amount of savings. In this mode, the water heater only operates the heat pump to heat the water.

Hybrid Mode

Hybrid

In this setting your unit will use less energy, while still providing you with a fast recovery time. If needed, the standard electric elements may activate for a faster water temperature recovery time. Once the system determines that demand has been met, it will automatically revert back to using the heat pump only.

High Demand Mode or Boost Mode

High Demand or Boost

This is the great feature when a larger water demand is needed, such as when guests are staying in your home. With the high demand mode the unit operates very similar to Hybrid mode, but with a faster recovery period. It does this by cycling on the heating elements sooner and for a longer duration of time.

Standard Mode

Standard

This feature is great for extremely cold situations (less than 45°F ambient), where heat pump functionality is less than ideal. In this mode, only the electric elements are used to heat the water.

Vacation Mode

Vacation Mode

Save energy while you're away. This setting allows the system to drop the water heater temperature setpoint to 50°F to save energy, while also preventing the water from freezing. All you do is set the number days you will be away. The unit automatically resets, and starts to heat your water one day before your return.